Polymer composites containing waste dust from power production I. Influence of particles’ mechanical activation on composite’s strength characteristics

Authors

  • Milena Koleva Technical University of Gabrovo, 4 Hadji Dimitar str., 5300 Gabrovo,
  • Venceslav Vassilev University for Chemical Technology and Metallurgy, 8 Kl. Ohridski blvd., Sofia,
  • Gergo Vassilev University for Chemical Technology and Metallurgy, 8 Kl. Ohridski blvd., Sofia,

DOI:

https://doi.org/10.20450/mjcce.2008.245

Keywords:

polymer composite, waste dust, mechanical activation, strength properties

Abstract

Polymer composites containing filler of waste dust from power production were studied. Waste particles were mechanically treated at room temperature for 30 minutes and the influence of mechanical activation on particles size distribution, chemical composition, and shape was established. Composites’ strength characteristics (bending, compressive and impact strength) were tested depending on the amount of waste dust in the composite. The optimal results were achieved at waste concentrations up to 10 wt. %.

References

http://www.mindfully.org/Energy/Power-Industry-Polluter.htm

M. Koleva, A. Zheglova, V. Vassilev et al., Strength characteristics of polymer composites with waste dust from power production, Proceedings of International Scientific Conference UNITEH’07, Gabrovo, Bulgaria, 2007, pp 339–343.

E. Fidancevska, V. Vassilev, M. Milosevski, S. Parvanov, D. Milosevski, L. Aljihmani, Composites on the base of industrial wastes. I. Physico-chemical properties of Fe-Ni slag, J. Univ. Chem. Technol. Met., 41 (4), 431–438 (2006).

V. Vassilev, E. Fidancevska, M. Milosevski, T. Hristova- Vasileva, Composites on the base of industrial wastes. II. Physico-chemical properties of waste glass, Journ. Univ. Chem. Technol. Met., 42 (2), 175–180 (2007).

E. Fidancevska, V. Vassilev, M. Milosevski, S.Parvanov, D. Milosevski, L. Aljihmani, Composites on the base of industrial wastes. III. Production of composites of Fe-Ni slag and waste glass, J. Univ. Chem. Technol. Met., 42 (3), 285–290 (2007).

J. Matelepszy, Proceedings of 8th Intern. Congr. „Chemistry of Cements“, Brazil, Vol. IV, 1986, pp. 104–107.

C. Shi, R. L. Day. Cement, Concrete and Aggregate, 18 (1), 8–14 (1996).

S. Bachvarov, B. Kostov, B. Samuneva, Handbook about silicates technology. Technika, Sofia, 1978.

Physical Chemistry of Multicomponent Polymer Systems, Vol. 1. Edited by Y. S. Lipatov. Naukova dumka, Kiev, 1986, p 130.

Published

2008-06-15

How to Cite

Koleva, M., Vassilev, V., & Vassilev, G. (2008). Polymer composites containing waste dust from power production I. Influence of particles’ mechanical activation on composite’s strength characteristics. Macedonian Journal of Chemistry and Chemical Engineering, 27(1), 41–46. https://doi.org/10.20450/mjcce.2008.245

Issue

Vol. 27 No. 1 (2008)

Section

Inorganic Chemistry

License

The authors agree to the following licence: Attribution-NonCommercial 4.0 International (CC BY-NC 4.0)

  • Adapt — remix, transform, and build upon the material
  • for any purpose, even commercially.
The licensor cannot revoke these freedoms as long as you follow the license terms.

 Under the following terms:

  • Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.

  • NonCommercial — You may not use the material for commercial purposes.