Biocomposites based on poly(lactic acid) and kenaf fibers: Effect of micro-fibrillated cellulose

Authors

  • Gordana Bogoeva-Gaceva Faculty of Technology and Metallurgy, Ss. Cyril and Methodius University, Skopje
  • Dimko Dimeski Faculty of Technology, Goce Delčev University, Štip
  • Vineta Srebrenkoska Faculty of Technology, Goce Delčev University, Štip

DOI:

https://doi.org/10.20450/mjcce.2013.451

Keywords:

biocomposites, poly(lactic acid), kenaf fibers, microfibrillated cellulose

Abstract

In this work, the influence of microfibrillated cellulose (MFC) on the basic mechanical properties of PLA/kenaf fiber biocomposites has been studied. The addition of 5–15 % microfibrillated cellulose to a biocomposite premix has resulted in an increased glass transition temperature of the final product, produced by compression molding of previously melt-mixed composite components. The presence of MFC has influenced the interface-sensitive properties of the PLA/kenaf composite: at an optimal loading of 10 %, the interfacial energy release rate was increased by about 20 %. Moreover, flexural strength and modulus of the composites were also improved (from 34.8 MPa to 57.1 MPa and from 4.9 GPa to 5.8 GPa, respectively).  

 

References

J. Holbery, J. Houston, Natural-fiber-reinforced polymer composites in automotive applications, JOM, 11, 80–86 (2006).

K. Bledzki, O. Faruk, V. E. Sperber, Cars from biofibers, Macromolecular Materials Engineering, 291, 449–457 (2006).

P. Wambua, J. Ivens, I. Verpoest, Natural fibers: can they replace glass in fiber reinforced plastics? Composite Science and Technology, 63, 1259– 1264 (2003).

K. Oksman, M. Skrifvars and J. F. Selin, Natural fibers as reinforcement in PLA composites, Composite Science and Technology, 63, 1317–1324 (2003).

T. Nishino, K. Hirao, M. Kotera, K. Nakamae and H. Inagaki, Kenaf reinforced biodegradable composites, Composite Science and Technology, 63, 1281–1286 (2003).

H. M. Akil, M. F. Omar, A. A. M. Mazuki, S. Safiee, Z. A. M. Ishak and A. Abu Bakar, Kenaf fiber reinforced composites: A review, Materials and Design, 32, 4107–4121 (2011).

I. S. Aji, S. M. Sapuan, E. S. Zainudin and K. Abdan, Kenaf fibers as reinforcement for polymer composites: A review, International Journal of Mechanics and Materials Engineering, 4, 239– 248 (2009).

C. W. Chin and B. F. Yousif, Potential of kenaf fibers as reinforcement for tribological applications, Wear, 267, 1550–1557 (2009).

M. Zampaconi, F. Pourboghart, S. A. Yankovich, B. N. Rodgers, J. Moore, L. T. Drzal, A. K. Mohanty, M. Misra, Kenaf natural fiber reinforced polypropylene, Composites, A discussion on manufacturing problems and solutions, Composites: Part A, 38, 1569–1580 (2007).

S. Shibata, Y. Cao, I. Fukumoto, Light weight laminate composites made from kenaf and PP fibers, Polymer Testing, 25, 142–148 (2006).

M. P. Westman, L. S. Fifield, K. L. Simmons, S. G. Laddha and T. A. Kafentzis, Natural fiber composites: A review, US Dept. of Energy, DE-report- AC05-76RL01830 (2010).

V. Srebrenkoska, G. Bogoeva-Gaceva and D. Dimeski, Preparation and recycling of polymer eco-composites.I. Comparison of the conventional molding techniques for preparation of polymer eco-composites, Macedonian Journal of Chemistry and Chemical Engineering, 28, 99–109 (2009).

G. Bogoeva-Gaceva, D. Dimeski and V. Srebrenkoska, Poly(lactic acid)/kenaf fiber composites: effect of micro-fibrillated cellulose on interfacesensitive properties, XXII Congress of SHTM, Ohrid, 5-9 Sept. 2012.

A. Bismarck, S. Mishra, T. Lampke, Plant fibers as reinforcement for green composites. A. K. Mohanty, M. Misra, L. T. Drzal, Editors. Natural Fibers, Biopolymers and biocomposites. Boca Raton (FL), CRC Press, 2005.

M. Avella, G. Bogoeva-Gaceva, A. Buzarovska, M. E. Errico, G. Gentile and A. Grozdanov, Poly(lactic acid)-based biocomposites reinforced with kenaf fibers, Journal of Applied Polymer Science, 108, 3542–3551 (2008).

L. Suryanegara, A. N. Nakagaito, H. Yano, The effect of crystallization of PLA on the thermal and mechanical properties of microfibrillated cellulose- reinforced PLA composites, Composite Science and Technology, 69, 1187–1192 (2009).

A. Iwatake, M. Nogi, H. Yano, Cellulose nanofiber reinforced polylactic acid, Composite Science and Technology, 68, 2103–2116 (2008).

L. Suryanegara, A. N. Nakagaito, H. Yano, Thermo- mechanical properties of microfibrillated cellulose- reinforced partially crystallized PLA composites, Cellulose, 17, 771–778 (2010).

Downloads

Published

2013-12-01

How to Cite

Bogoeva-Gaceva, G., Dimeski, D., & Srebrenkoska, V. (2013). Biocomposites based on poly(lactic acid) and kenaf fibers: Effect of micro-fibrillated cellulose. Macedonian Journal of Chemistry and Chemical Engineering, 32(2), 331–335. https://doi.org/10.20450/mjcce.2013.451

Issue

Section

Materials Engineering

Most read articles by the same author(s)

> >>