Semi-interpenetrating network hydrogels based on poly(methacrylic acid) and natural polymers gelatin, chitosan, and alginate, for potential biomedical applications
DOI:
https://doi.org/10.20450/mjcce.2025.2999Keywords:
IPN hydrogel, poly (methacrylic acid), natural polymers, drug releaseAbstract
Hydrogels, known for their high hydration, porosity, and permeability, are widely studied for biomedical applications. This paper reports on semi-interpenetrating network (IPN) hydrogels composed of poly(methacrylic acid) (PMA) and natural polymers (gelatin, alginate, and chitosan), synthesized via thermally-induced free-radical polymerization. The resulting hydrogels were evaluated for their physicochemical, mechanical, and drug release properties. Characterization techniques, including Fourier transform infrared (FTIR) spectroscopy, Field emission scanning electron microscope (FE-SEM), and swelling capacity analysis, demonstrated effective integration of natural polymers within the PMA network and their impact on hydrogel performance. PMA's pH sensitivity, combined with natural polymers, supports its suitability for controlled drug delivery and tissue engineering. Mechanical testing showed that adding 40 wt% of gelatin significantly increased the compressive strength from 0.16 MPa in pristine PMA to 2.35 MPa for PMA/gelatin IPN hydrogel and increased the modulus from 0.006 to 0.027 MPa. Chitosan provided moderate mechanical improvements, while alginate showed limited effects at higher concentrations. Swelling analysis revealed that the addition of gelatin and alginate reduced the equilibrium swelling ratio (ESR), suggesting denser crosslinking within the hydrogel matrix. Due to its pH-sensitive properties, chitosan had increased ESR at lower pH levels, showing potential for enhanced drug release modulation. Ciprofloxacin release studies demonstrated ESR-dependent drug release kinetics. These findings suggest that the incorporation of natural polymers, particularly gelatin, optimizes mechanical properties, pH-responsive swelling, and biocompatibility, making these hydrogels promising candidates for controlled drug delivery and tissue engineering applications.
References
(1) Zhang, J.; Peppas, N. A., Synthesis and Characterization of PH- and Temperature-Sensitive Poly(Methacrylic Acid)/ Poly(N-Isopropylacrylamide) Interpenetrating Polymeric Networks. Macromolecules 2000, 33 (1), 102–107.
https://doi.org/10.1021/ma991398q
(2) Xue, R.; Zhang, W.; Sun, P.; Zada, I.; Guo, C.; Liu, Q.; Gu, J.; Su, H.; Zhang, D., Angle-Independent PH-Sensitive Composites with Natural Gyroid Structure. Sci. Rep. 2017, 7, 42207.
https://doi.org/10.1038/srep42207
(3) Gulyuz, U., Dual Cross-Linked Polymethacrylic Acid Hydrogels with Tunable Mechanical Properties and Shape Memory Behavior. Macromol. Mater. Eng. 2021, 306 (9), 2100201.
https://doi.org/10.1002/mame.202100201
(4) Lumbreras-Aguayo, A.; Meléndez-Ortiz, H. I.; Puente-Urbina, B.; Alvarado-Canché, C.; Ledezma, A.; Romero-García, J.; Betancourt-Galindo, R., Poly(Methacrylic Acid)-Modified Medical Cotton Gauzes with Antimicrobial and Drug Delivery Properties for Their Use as Wound Dressings. Carbohydr. Polym. 2019, 205, 203–210.
https://doi.org/10.1016/j.carbpol.2018.10.015
(5) Caldorera-Moore, M.; Vela Ramirez, J. E.; Peppas, N. A., Transport and Delivery of Interferon-α through Epithelial Tight Junctions via pH-Responsive Poly (Methacrylic Acid-Grafted-Ethylene Glycol) Nano-particles. J. Drug Target. 2019, 27 (5–6), 582–589. https://doi.org/10.1080/1061186X.2018.1547732.
(6) Pérez-Chávez, N. A.; Nosthas Aguiar, V.; Allegretto, J. A.; Albesa, A. G.; Giussi, J. M.; Longo, G. S., Trig-gering Doxorubicin Release from Responsive Hydrogel Films by Polyamine Uptake. Soft Matter 2020, 16 (32), 7492–7502. https://doi.org/10.1039/D0SM00951B
(7) Vatankhah, Z.; Dehghani, E.; Salami-Kalajahi, M.; Roghani-Mamaqani, H., One-Step Fabrication of Low Cytotoxic Anisotropic Poly(2-Hydroxyethyl Methacrylate-Co-Methacrylic Acid) Particles for Efficient Release of DOX. J. Drug Deliv. Sci. Technol. 2019, 54, 101332. https://doi.org/10.1016/j.jddst.2019.101332
(8) Panic, V.; Adnadjevic, B.; Velickovic, S.; Jovanovic, J., The Effects of the Synthesis Parameters on the Xerogels Structures and on the Swelling Parameters of the Poly(Methacrylic Acid) Hydrogels. Chem. Eng. J. 2010, 156 (1), 206–214.
https://doi.org/10.1016/J.CEJ.2009.10.040
(9) Ugrinovic, V.; Panic, V.; Spasojevic, P.; Seslija, S.; Bozic, B.; Petrovic, R.; Janackovic, D.; Veljovic, D., Strong and Tough, pH Sensible, Interpenetrating Net-work Hydrogels Based on Gelatin and Poly (Methacrylic Acid). Polym. Eng. Sci. 2022, 62 (3), 622–636.
https://doi.org/10.1002/pen.25870
(10) Yan, X.; Chen, Q.; Zhu, L.; Chen, H.; Wei, D.; Chen, F.; Tang, Z.; Yang, J.; Zheng, J., High Strength and Self-Healable Gelatin/Polyacrylamide Double Network Hydrogels. J. Mater. Chem. B 2017, 5 (37), 7683–7691. https://doi.org/10.1039/C7TB01780D
(11) Zhang, H. J.; Wang, L.; Wang, X.; Han, Q.; You, X., Developing Super Tough Gelatin-Based Hydrogels by Incorporating Linear Poly(Methacrylic Acid) to Facilitate Sacrificial Hydrogen Bonding. Soft Matter 2020, 16 (20), 4723–4727.
https://doi.org/10.1039/D0SM00422G
(12) Thangprasert, A.; Tansakul, C.; Thuaksubun, N.; Me-esane, J., Mimicked Hybrid Hydrogel Based on Gelatin/PVA for Tissue Engineering in Subchondral Bone Interface for Osteoarthritis Surgery. Mater. Des. 2019, 183, 108113.
https://doi.org/10.1016/j.matdes.2019.108113
(13) Тer Horst, B.; Moiemen, N. S.; Grover, L. M., 6 –Natural Polymers: Biomaterials for Skin Scaffolds; In: Biomaterials for Skin Repair and Regeneration, E. García-Gareta, (Ed.). Woodhead Publishing, 2019; pp 151–192.
https://doi.org/10.1016/B978-0-08-102546-8.00006-6
(14) Georgopoulou, A.; Papadogiannis, F.; Batsali, A.; Marakis, J.; Alpantaki, K.; Eliopoulos, A. G.; Pontikoglou, C.; Chatzinikolaidou, M., Chitosan/Gelatin Scaffolds Sup¬port Bone Regeneration. J. Mater. Sci. Mater. Med. 2018, 29 (5), 59.
https://doi.org/10.1007/s10856-018-6064-2
(15) Sung, H.; Huang, D.; Chang, W.; Huang, R.; Hsu, J., Evaluation of Gelatin Hydrogel Crosslinked with Various Crosslinking Agents as Bioadhesives: In Vitro Study. J. Biomed. Mater. Res. 1999, 46 (4), 520–530.
(16) Bhattarai, N.; Gunn, J.; Zhang, M., Chitosan-Based Hydrogels for Controlled, Localized Drug Delivery. Adv. Drug Deliv. Rev. 2010, 62 (1), 83–99.
https://doi.org/10.1016/j.addr.2009.07.019
(17) Denkbas, E. B.; Ottenbrite, R. M., Perspectives on: Chitosan Drug Delivery Systems Based on Their Geometries. J. Bioact. Compat. Polym. 2006, 21 (4), 351–368. https://doi.org/10.1177/0883911506066930
(18) Jeon, O.; Bouhadir, K. H.; Mansour, J. M.; Alsberg, E., Photocrosslinked Alginate Hydrogels with Tunable Biodegradation Rates and Mechanical Properties. Biomaterials 2009, 30 (14), 2724–2734.
https://doi.org/10.1016/j.biomaterials.2009.01.034.
(19) Coviello, T.; Matricardi, P.; Marianecci, C.; Alhaique, F., Polysaccharide Hydrogels for Modified Release Formulations. J. Control. Release 2007, 119 (1), 5–24. https://doi.org/10.1016/j.jconrel.2007.01.004
(20) Gupta, N. V.; Satish, C. S.; Shivakumar, H. G., Preparation and Characterization of Gelatin-Poly(Methacrylic Acid) Interpenetrating Polymeric Network Hydrogels as a PH-Sensitive Delivery System for Glipizide. Indian J. Pharm. Sci. 2007, 69 (1), 64.
(21) Ugrinovic, V.; Markovic, M.; Bozic, B.; Panic, V.; Veljovic, D., Physically Crosslinked Poly(Methacrylic Acid)/Gelatin Hydrogels with Excellent Fatigue Resistance and Shape Memory Properties. Gels. 2024. 12 (7), 444. https://doi.org/10.3390/gels10070444
(22) Chen, S.; Liu, M.; Jin, S.; Chen, Y., Synthesis and Swelling Properties of pH-Sensitive Hydrogels Based on Chitosan and Poly(Methacrylic Acid) Semi-Inter-penetrating Polymer Network. J. Appl. Polym. Sci. 2005, 98 (4), 1720–1726.
https://doi.org/10.1002/app.22348
(23) Maity, J.; Ray, S. K., Enhanced Adsorption of Methyl Violet and Congo Red by Using Semi and Full IPN of Polymethacrylic Acid and Chitosan. Carbohydr. Polym. 2014, 104, 8–16.
https://doi.org/10.1016/j.carbpol.2013.12.086
(24) Dragan, E. S.; Cocarta, A. I.; Gierszewska, M., Designing Novel Macroporous Composite Hydrogels Based on Methacrylic Acid Copolymers and Chitosan and in Vitro Assessment of Lysozyme Controlled Delivery. Colloids Surfaces B Biointerfaces 2016, 139, 33–41.
https://doi.org/10.1016/j.colsurfb.2015.12.011
(25) Sajeesh, S.; Sharma, C. P., Poly Methacrylic Acid-Alginate Semi-IPN Microparticles for Oral Delivery of Insulin: A Preliminary Investigation. J. Biomater. Appl. 2004, 19 (1), 35–45.
https://doi.org/10.1177/0885328204042992
(26) Kim, S. J.; Yoon, S. G.; Kim, I. Y.; Kim, N. G.; Kim, S. I., Swelling Characterizations of the Interpenetrating Polymer Network Hydrogels Composed of Poly-methacrylic Acid and Alginate. J. Macromol. Sci. Part A 2005, 42 (6), 811–820.
https://doi.org/10.1081/MA-200058669
(27) Kim, S. J.; Yoon, S. G.; Lee, Y. H.; Kim, S. I., Bending Behavior of Hydrogels Composed of Poly(Methacrylic Acid) and Alginate by Electrical Stimulus. Polym. Int. 2004, 53 (10), 1456–1460.
https://doi.org/10.1002/pi.1560.
(28) Pal, K.; Jaiswal, S.; Yadav, P.; Kumar, R.; Minocha, T.; Yadav, S. K., Multi-Responsive Hydrogel Based on Sodium Alginate with Acrylic Acid and Methacrylic Acid: Impact on Normal and Cancerous Cells. J. Polym. Sci. 2025, 63 (3), 578–594.
https://doi.org/10.1002/pol.20240804
(29) Zhang, H. J.; Wang, X.; Yang, Y.; Sun, T. L.; Zhang, A.; You, X., Effect of Hydrophobic Side Group on Structural Heterogeneities and Mechanical Performance of Gelatin-Based Hydrogen-Bonded Hydrogel. Macro¬molecules 2022, 55 (17), 7401–7410.
https://doi.org/10.1021/acs.macromol.2c01386
(30) Fernandes Queiroz, M.; Melo, K. R.; Sabry, D. A.; Sassaki, G. L.; Rocha, H. A., Does the Use of Chitosan Contribute to Oxalate Kidney Stone Formation? Marine Drugs. 2015, pp. 141–158.
https://doi.org/10.3390/md13010141
(31) Bekin, S.; Sarmad, S.; Gürkan, K.; Keçeli, G.; Gürdağ, G., Synthesis, Characterization and Bending Behavior of Electroresponsive Sodium Alginate/Poly(Acrylic Acid) Interpenetrating Network Films under an Electric Field Stimulus. Sensors Actuators B Chem. 2014, 202, 878–892. https://doi.org/10.1016/j.snb.2014.06.051
(32) Chenite, A.; Chaput, C.; Wang, D.; Combes, C.; Buschmann, M. D.; Hoemann, C. D.; Leroux, J. C.; Atkinson, B. L.; Binette, F.; Selmani, A., Novel Injec¬table Neutral Solutions of Chitosan Form Biodegradable Gels in Situ. Biomaterials 2000, 21 (21), 2155–2161. https://doi.org/10.1016/S0142-9612(00)00116-2
(33) Rizwan, M.; Yahya, R.; Hassan, A.; Yar, M.; Azzahari, A. D.; Selvanathan, V.; Sonsudin, F.; Abouloula, C. N., pH Sensitive Hydrogels in Drug Delivery: Brief History, Properties, Swelling, and Release Mechanism, Material Selection and Applications. Polymers (Basel). 2017, 9 (4). https://doi.org/10.3390/polym9040137
(34) Revete, A.; Aparicio, A.; Cisterna, B. A.; Revete, J.; Luis, L.; Ibarra, E.; Segura González, E. A.; Molino, J.; Reginensi, D., Advancements in the Use of Hydrogels for Regenerative Medicine: Properties and Biomedical Applications. Int. J. Biomater. 2022, 2022 (1), 3606765. https://doi.org/10.1155/2022/3606765
(35) Liu, Y.; Lang, C.; Ding, Y.; Sun, S.; Sun, G., Chitosan with Enhanced Deprotonation for Accelerated Thermo-sensitive Gelation with β-Glycerophosphate. Eur. Polym. J. 2023, 196, 112229.
https://doi.org/10.1016/j.eurpolymj.2023.112229
(36) Dash, S.; Murthy, P. N.; Nath, L.; Chowdhury, P., Kinetic Modeling on Drug Release from Controlled Drug Delivery Systems. Acta Pol. Pharm. 2010, 67 (3), 217–223.
Downloads
Published
Versions
- 2025-06-29 (2)
- 2025-05-28 (1)
How to Cite
Issue
Section
License
Copyright (c) 2025 Vukasin Ugrinovic, Andjela Radisavljevic, Maja Markovic, Vesna Panic, Djordje Veljovic
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
