Urea-carbon nanotube composites: Synthesis, characterization, and differential antibacterial activity against S. aureus and E. coli

Authors

  • Qadoori Zedan Khalaf Department of Chemistry, College of Education, Al-Iraqia University, Iraq
  • Kareem Jumaah Al-Salihi Department of Chemistry, College of Science, University of Sulaimani, Sulaymaniyah, Iraq https://orcid.org/0000-0002-0139-6233
  • Mahir Essa Al-Salihi Medical Laboratory Technology Department, Kifri Technical Institute, Garmian Polytechnic University, Kifri, Iraq https://orcid.org/0000-0001-7068-6886

DOI:

https://doi.org/10.20450/mjcce.2026.3579

Keywords:

Urea, Carbon nanotubes, Composite materials, Antibacterial activity, Urea, Carbon nantubes, Composite material

Abstract

This study focuses on the synthesis, characterization, and antibacterial assessment of urea-functionalized carbon nanotube (CNT) composites. Amide nanotubes can be formed through the self-assembly of amphiphilic molecules driven by hydrogen-bonding interactions; however, previously reported approaches may be limited by aggregation and difficulties in large-scale production. In the present work, CNTs were functionalized with urea and systematically characterized using Fourier-transform infrared spectroscopy, X-ray diffraction, X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis, scanning electron microscopy, atomic force microscopy, and measurement of the zeta potential to evaluate their structural, chemical, thermal, morphological, and surface-charge properties. The results demonstrated the incorporation of urea-derived functionalities onto the CNT surface. Although functionalization decreased the thermal stability of the CNTs, the spectroscopic results indicated the presence of amide-related functional groups in the CNT–urea–CNT composite. Among the characterization techniques, XPS provided direct evidence of urea incorporation through the appearance of the N 1s signal and corresponding changes in the C 1s and O 1s spectra. Collectively, these results demonstrate substantial modification of the CNT surface following treatment with urea, without implying definitive covalent attachment. Measurement of the zeta potential further revealed a substantial alteration in the surface-charge behavior following functionalization. As pH increased, the zeta potential progressively decreased, a phenomenon that can be attributed to the deprotonation of surface functional groups. Pristine CNTs exhibited an isoelectric point (IEP) at approximately pH 7–8, whereas urea functionalization shifted the IEP to around pH 4, indicating a significant modification of the CNT surface chemistry. The urea–CNT and CNT–urea–CNT composites exhibited concentration-dependent antibacterial activity against Staphylococcus aureus and Escherichia coli at 0.01–0.1 mg mL–1. The CNT–urea–CNT composite was more active against S. aureus at 0.05 and 0.1 mg mL–1, while the urea–CNT composite showed greater activity at 0.01 mg mL–1. The CNT–urea–CNT composite consistently exhibited stronger activity against E. coli, with a maximum inhibition zone of 33 ± 3.01 mm at 0.1 mg mL–1. These differences may reflect variations in surface structure, dispersion, and interactions with bacterial membranes.

References

(1) Iijima, S. Helical Microtubules of Graphitic Carbon. Nature 1991, 354, 56–58.

(2) Tasis, D.; Tagmatarchis, N.; Bianco, A.; Prato, M. Chemistry of Carbon Nanotubes. Chem. Rev. 2006, 106 (3), 1105–1136.

(3) Lin, Y.; Taylor, S.; Li, H.; Fernando, K. A. S.; Qu, L.; Wang, W.; Gu, L.; Zhou, B.; Sun, Y.-P. Advances toward Bio Applications of Carbon Nanotubes. J. Mater. Chem. 2004, 14, 527–541.

(4) Tan, J. M.; Arulselvan, P.; Fakurazi, S; Ithnin, H.; Hussein, M. Z. A Review on Characterizations and Biocompatibility of Functionalized Carbon Nanotubes in Drug Delivery Design, Journal of Nanomaterials, 2014, 917024, 20 pages. https://doi.org/10.1155/2014/917024.

(5) Dubey, R.; Dutta, D.; Sarkar, A.; Chattopadhyay, P. Functionalized Carbon Nanotubes: Synthesis, Properties and Applications in Water Purification, Drug Delivery, and Material and Biomedical Sciences. Nanoscale Adv. 2021, 3, 5722–5744.

(6) Chang, R. Y. K.; Nang, S. C.; Chan, H.-K.; Li, J. Novel Antimicrobial Agents for Combating Antibiotic-Resistant Bacteria. Adv. Drug Delivery Rev. 2022, 187, 114378.

(7) Roldo, M.; Fatouros, D. G. Biomedical Applications of Carbon Nanotubes. Annu. Rep. Prog. Chem., Sect. C: Phys. Chem. 2013, 109, 10–35.

(8) Khalaf, Q. Z.; Mohsen, M. K.; Al-Salihi, K. J. J.; Omer, R. A.; Azeez, Y. H. Synthesis and Density Functional Theory Study on the Functionalization of Carbon Nanotube Conjugates with Amino Compounds and Their Application in Dyeing Processes. ChemistrySelect 2024, 9 (25), e202403525.

(9) Vardharajula, S.; Ali, S. Z.; Tiwari, P. M.; Eroğlu, E.; Vig, K.; Dennis, V. A.; Singh, S. R. Functionalized Carbon Nanotubes: Biomedical Applications. Int. J. Nanomed. 2012, 7, 5361–5374.

https://doi.org/10.2147/IJN.S35832

(10) Bianco, A.; Kostarelos, K.; Prato, M. Applications of Carbon Nanotubes in Drug Delivery. Curr. Opin. Chem. Biol. 2005, 9 (6), 674–679.

(11) Kang, S.; Mauter, M. S.; Elimelech, M. Physicochemical Determinants of Multiwalled Carbon Nanotube Bacterial Cytotoxicity. Environ. Sci. Technol. 2008, 42 (19), 7528–7534. https://doi.org/10.1021/es8010173

(12) Gatoo, M. A.; Naseem, S.; Arfat, Mir Y.; Mahmood D.; Ayaz, Qasim, K.; Zubair, S. Physicochemical Properties of Nanomaterials: Implication in Associated Toxic Manifestations, BioMed Res. Int. 2014, 498420, 8 pages. https://doi.org/10.1155/2014/498420.

(13) Olivi, M.; Zanni, E.; De Bellis, G.; Talora, C.; Sarto, M. S.; Palleschi, C.; Flahaut, E.; Monthioux, M.; Rapino, S.; Uccelletti, D.; Fiorito, S. Inhibition of Microbial Growth by Carbon Nanotube Networks. Nanoscale 2013, 5 (19), 9023–9029.

(14) Kang, S.; Mauter, M. S.; Elimelech, M. Microbial Cytotoxicity of Carbon-Based Nanomaterials: Implications for River Water and Wastewater Effluent. Environ. Sci. Technol. 2009, 43, 2648–2653.

(15) Abo-Neima, S. E.; Motaweh, H. A.; Elsehly, E. M. Antimicrobial Activity of Functionalized Carbon Nanotubes against Pathogenic Microorganisms. IET Nanobiotechnol. 2020, 14 (6), 457–464.

(16) Ji, H.; Sun, H.; Qu, X. Antibacterial Applications of Graphene-Based Nanomaterials: Recent Achievements and Challenges. Adv. Drug Delivery Rev. 2016, 105, 176–189.

(17) Prasad, K.; Lekshmi, G. S.; Ostrikov, K.; Lussini, V.; Blinco, J.; Mohandas, M.; Vasilev, K.; Bottle, S.; Bazaka, K.; Ostrikov, K. Synergic Bactericidal Effects of Reduced Graphene Oxide and Silver Nanoparticles against Gram-Positive and Gram-Negative Bacteria. Sci. Rep. 2017, 7, 1591.

(18) Moskvitina, E.; Kuznetsov, V.; Moseenkov, S.; Serkova, A.; Zavorin, A. Antibacterial Effect of Carbon Nanomaterials: Nanotubes, Carbon Nanofibers, Nanodiamonds, and Onion-like Carbon. Materials 2023, 16 (3), 957. https://doi.org/10.3390/ma16030957

(19) Li, H.; He, X.; Liu, Y.; Huang, H.; Lian, S.; Lee, S.-T. One-Step Ultrasonic Synthesis of Water-Soluble Carbon Nanoparticles with Excellent Photoluminescent Properties. Carbon 2011, 49, 605–609.

(20) Saeed, K.; Park, S.-Y. Preparation and Characterization of Multiwalled Carbon Nanotubes/Polyacrylonitrile Nanofibers. J. Polym. Res. 2010, 17, 535–540. https://doi.org/10.1007/s10965-009-9341-4

(21) Bauer, A. W.; Kirby, W. M.; Sherris, J. C.; Turck, M. Antibiotic Susceptibility Testing by a Standardized Single Disk Method. Am. J. Clin. Pathol. 1966, 45, 493–496.

(22) Khan, Z. A.; Siddiqui, M. F.; Park, S. Current and Emerging Methods of Antibiotic Susceptibility Testing. Diagnostics 2019, 9, 49.

(23) González-Sánchez, M.; Valera, J. S.; Veiga-Herrero, J.; Chamorro, P. B.; Aparicio, F.; González-Rodríguez, D. Self-Assembled Nanotubes from the Supramolecular Polymerization of Discrete Cyclic Entities. Chem. Soc. Rev. 2025, 54, 5657–5697.

(24) Díez-Pascual, A. M. Chemical Functionalization of Carbon Nanotubes with Polymers: A Brief Overview. Macromol. 2021, 1, 64–83.

https://doi.org/10.3390/macromol1020006

(25) Gerber, I.; Oubenali, M.; Bacsa, R.; Durand, J.; Gonçalves, A.; Pereira, M. F. R.; Jolibois, F.; Perrin, L.; Poteau, R.; Serp, P. Theoretical and Experimental Studies on the Carbon-Nanotube Surface Oxidation by Nitric Acid: Interplay between Functionalization and Vacancy Enlargement. Chem. Eur. J. 2011, 17, 11467–11477. https://doi.org/10.1002/chem.201101438

(26) Das, R.; Abd Hamid, S. B.; Ali, M. E.; Ramakrishna, S.; Yongzhi, W. Carbon Nanotubes Characterization by X-ray Powder Diffraction – A Review. Curr. Nanosci. 2015, 11 (1).

(27) Oddershede, J.; Nielsen, K.; Stahl, K. Using X-ray Powder Diffraction and Principal Component Analysis to Determine Structural Properties for Bulk Samples of Multiwall Carbon Nanotubes. Z. Kristallogr. 2007, 222, 186–192.

(28) Hammond, R.; Pencheva, K.; Roberts, K. J.; Mougin, P.; Wilkinson, D. An Examination of the Thermal Expansion of Urea Using High-Resolution Variable-Temperature X-ray Powder Diffraction. J. Appl. Crystallogr. 2005, 38, 1038–1039.

(29) Cavness, B.; Heimbecker, J.; Velasquez III, J., V.; Williams, S. X-ray Fluorescence as a Method of Monitoring Metal Catalyst Content during the Purification of Carbon Nanotubes. Radiat. Phys. Chem. 2012, 81 (2), 131–134.

(30) García-Gutiérrez, M. C.; Nogales, A.; Hernández, J. J.; Rueda, D. R.; Ezquerra, T. A. X-ray Scattering Applied to the Analysis of Carbon Nanotubes, Polymers and Nanocomposites. Opt. Pura Apl. 2007, 40 (2), 195–205.

(31) Maiti, K. S. Ultrafast N–H Vibrational Dynamics of Hydrogen-Bonded Cyclic Amide Reveal by 2DIR Spectroscopy. Chem. Phys. 2018, 515, 509–512.

(32) Naeimi, H.; Mohajeri, A.; Moradi, L.; Morad Rashidi, A. Solubilization of Multi Walled Carbon Nanotubes under a Facile and Mild Condition. J. Nanosci. Nanotechnol. 2011, 11, 1–4.

(33) Yatim, M.; Shaaban, N.; Dimin, A.; Yusof, M. F.; Abd Razak, F.; Jeefferie, A. R. Application of Response Surface Methodology for Optimization of Urea Grafted Multiwalled Carbon Nanotubes in Enhancing Nitrogen Use Efficiency and Nitrogen Uptake by Paddy Plants. J. Nanotechnol. 2016, 2016, 1250739.

https://doi.org/10.1155/2016/1250739

(34) Yatim, N. M.; Shaaban, A.; Dimin, M. F.; Yusof, F.; Razak, J. A. Effect of Functionalised and Non-Functionalised Carbon Nanotubes-Urea Fertilizer on the Growth of Paddy. Trop. Life Sci. Res. 2018, 29 (1), 17–35. https://doi.org/10.21315/tlsr2018.29.1.2

(35) Wang, Y.; Hu, Q.; Ye, M.; Huang, X.; Chen, Q.; Hu, C. Synergistic Flame Retardancy of Epoxy Resin with Aminated Multi-Walled Carbon Nanotubes and Ammonium Polyphosphate. Polymers 2026, 18 (10), 1158. https://doi.org/10.3390/polym18101158

(36) Xu, S.; Lu, R.; Sun, K.; Tang, J.; Cen, Y.; Luo, L.; Wang, Z.; Tian, S.; Sun, X. Synergistic Effects in N,O-Comodified Carbon Nanotubes Boost Highly Selective Electrochemical Oxygen Reduction to H2O2. Adv. Sci. 2022, 9, 2201421.

https://doi.org/10.1002/advs.202201421

(37) Trakakis, G.; Tomara, G.; Datsyuk, V.; Sygellou, L.; Bakolas, A.; Tasis, D.; Parthenios, J.; Krontiras, C.; Georga, S.; Galiotis, C.; Papagelis, K. Mechanical, Electrical, and Thermal Properties of Carbon Nanotube Buckypapers/Epoxy Nanocomposites Produced by Oxidized and Epoxidized Nanotubes. Materials 2020, 13 (19), 4308. https://doi.org/10.3390/ma13194308

(38) Krasley, A. T.; Li, E.; Galeana, J. M.; Bulumulla, C.; Beyene, A. G.; Demirer, G. S. Carbon Nanomaterial Fluorescent Probes and Their Biological Applications. Chem. Rev. 2024, 124, 3085–3185.

(39) Slattery, A. D.; Shearer, C. J.; Shapter, J. G.; Blanch, A. J.; Quinton, J. S.; Gibson, C. T. Improved Application of Carbon Nanotube Atomic Force Microscopy Probes Using Peak Force Tapping Mode. Nanomaterials 2018, 8, 807. https://doi.org/10.3390/nano8100807

(40) Skwarek, E.; Bolbukh, Y.; Tertykh, V.; Janusz, W. Electrokinetic Properties of the Pristine and Oxidized MWCNT Depending on the Electrolyte Type and Concentration. Nanoscale Res. Lett. 2016, 11 (1), 166. https://doi.org/10.1186/s11671-016-1367-z

(41) Chen, L.; Xie, H.; Li, Y.; Yu, W. Surface Chemical Modification of Multiwalled Carbon Nanotubes by a Wet-Mechanochemical Reaction. J. Nanomater. 2008, 783981. https://doi.org/10.1155/2008/783981

(42) Zakharova, O. V.; Gusev, A. A.; Baranchikov, P. A.; Chebotaryova, S. P.; Razlivalova, S. S.; Koiava, E. Y.; Kataranova, A. A.; Grigoriev, G. V.; Strekalova, N. S.; Krutovsky, K. V. The Composition of the Dispersion Medium Determines the Antibacterial Properties of Copper(II) Oxide Nanoparticles against Escherichia coli Bacteria. Nanomaterials 2025, 15, 469. https://doi.org/10.3390/nano15060469

Downloads

Published

2026-11-21

How to Cite

Khalaf , Q. Z., Al-Salihi, K. J., & Al-Salihi, M. E. (2026). Urea-carbon nanotube composites: Synthesis, characterization, and differential antibacterial activity against S. aureus and E. coli. Macedonian Journal of Chemistry and Chemical Engineering, 45(2). https://doi.org/10.20450/mjcce.2026.3579

Issue

Section

Materials Chemistry