Fabrication and characterization of electrospun PLA/tuff composite membranes as potential eco-friendly metal adsorbents
DOI:
https://doi.org/10.20450/mjcce.2025.3334Keywords:
Electrospinning, Poly(lactic acid) (PLA), Opalized tuff, Heavy metal adsorption, Biodegradable compositesAbstract
In this study, electrospinning was successfully employed to fabricate membranes based on polylactic acid (PLA), a polymer known for its biodegradability, containing varying amounts of opalized tuff (0, 2, 5, and 10 wt%). The addition of tuff introduced active mineral sites within the fibrous network, while the PLA matrix ensured mechanical stability, environmental sustainability, and prevention of secondary pollution. The electrospun membranes exhibited a uniform fibrous morphology with well-developed surface porosity, as confirmed by scanning electron microscopy. X-ray powder diffraction and Fourier-transform infrared spectroscopy verified the preservation of the characteristic structural features of both PLA and tuff, indicating successful incorporation of the filler without chemical alteration of the polymer matrix. Scanning electron microscopy combined with energy dispersive X-ray spectroscopy analysis demonstrated effective adsorption of nickel (Ni2+) and lead (Pb2+) ions from aqueous solutions, attributed to the high surface activity of the silicate mineral phase. These findings highlight the synergistic combination of a renewable, environmentally friendly polymer and a naturally occurring mineral filler to produce efficient and eco-friendly adsorptive membranes for heavy metal removal from aqueous solution.
References
(1) Aziz, K. H. H.; Mustafa, F. S.; Omer, K. M.; Hama, S.; Hamarawf, R. F.; Rahman, K. O. Heavy Metal Pollution in the Aquatic Environment: Efficient and Low-Cost Removal Approaches to Eliminate Their Toxicity: A Review. RSC Adv. 2023, 13 (26), 17595–17610. https://doi.org/10.1039/D3RA00723E.
(2) Ali, H.; Khan, E.; Ilahi, I. Environmental Chemistry and Ecotoxicology of Hazardous Heavy Metals: Environmental Persistence, Toxicity, and Bioaccumulation. J. Chem. 2019, 2019 (1), 6730305. https://doi.org/10.1155/2019/6730305.
(3) Zhang, P.; Yang, M.; Lan, J.; Huang, Y.; Zhang, J.; Huang, S.; Yang, Y.; Ru, J. Water Quality Degradation Due to Heavy Metal Contamination: Health Impacts and Eco-Friendly Approaches for Heavy Metal Remediation. Toxics 2023, 11 (10), 828. https://doi.org/10.3390/toxics11100828.
(4) Singh, V.; Ahmed, G.; Vedika, S.; Kumar, P.; Chaturvedi, S. K.; Rai, S. N.; Vamanu, E.; Kumar, A. Toxic Heavy Metal Ions Contamination in Water and Their Sustainable Reduction by Eco-Friendly Methods: Isotherms, Thermodynamics and Kinetics Study. Sci. Rep. 2024, 14 (1), 7595. https://doi.org/10.1038/s41598-024-58061-3.
(5) Chai, W. S.; Cheun, J. Y.; Kumar, P. S.; Mubashir, M.; Majeed, Z.; Banat, F.; Ho, S.-H.; Show, P. L. A Review on Conventional and Novel Materials towards Heavy Metal Adsorption in Wastewater Treatment Application. J. Clean. Prod. 2021, 296, 126589. https://doi.org/10.1016/j.jclepro.2021.126589.
(6) Rajendran, S.; Priya, A. K.; Senthil Kumar, P.; Hoang, T. K. A.; Sekar, K.; Chong, K. Y.; Khoo, K. S.; Ng, H. S.; Show, P. L. A Critical and Recent Developments on Adsorption Technique for Removal of Heavy Metals from Wastewater-A Review. Chemosphere 2022, 303, 135146. https://doi.org/10.1016/j.chemosphere.2022.135146.
(7) Ali, I. The Quest for Active Carbon Adsorbent Substitutes: Inexpensive Adsorbents for Toxic Metal Ions Removal from Wastewater. Sep. Purif. Rev. 2010, 39 (3–4), 95–171. https://doi.org/10.1080/15422119.2010.527802.
(8) Akhtar, M. S.; Ali, S.; Zaman, W. Innovative Adsorbents for Pollutant Removal: Exploring the Latest Research and Applications. Molecules 2024, 29 (18), 4317. https://doi.org/10.3390/molecules29184317.
(9) Momina; Shahadat, M.; Isamil, S. Regeneration Performance of Clay-Based Adsorbents for the Removal of Industrial Dyes: A Review. RSC Adv. 2018, 8 (43), 24571–24587. https://doi.org/10.1039/C8RA04290J.
(10) Agboola, O.; Fayomi, O. S. I.; Ayodeji, A.; Ayeni, A. O.; Alagbe, E. E.; Sanni, S. E.; Okoro, E. E.; Moropeng, L.; Sadiku, R.; Kupolati, K. W.; Oni, B. A. A Review on Polymer Nanocomposites and Their Effective Applications in Membranes and Adsorbents for Water Treatment and Gas Separation. Membranes 2021, 11 (2), 139. https://doi.org/10.3390/membranes11020139.
(11) Vo, T. S.; Hossain, M. M.; Jeong, H. M.; Kim, K. Heavy Metal Removal Applications Using Adsorptive Membranes. Nano Converg. 2020, 7 (1), 36. https://doi.org/10.1186/s40580-020-00245-4.
(12) Ivanoska-Dacikj, A.; Bogoeva-Gaceva, G.; Krumme, A.; Tarasova, E.; Scalera, C.; Stojkovski, V.; Gjorgoski, I.; Ristoski, T. Biodegradable Polyurethane/Graphene Oxide Scaffolds for Soft Tissue Engineering: In Vivo Behavior Assessment. Int. J. Polym. Mater. Polym. Biomater. 2020, 69 (17), 1101–1111. https://doi.org/10.1080/00914037.2019.1655754.
(13) Ivanoska-Dacikj, A.; Makreski, P.; Bogoeva-Gaceva, G. Fabrication of Biodegradable Polyurethane Electrospun Webs of Fibers Modified with Biocompatible Graphene Oxide Nanofiller. J. Ind. Text. 2022, 51 (3_suppl), 4041S-4065S. https://doi.org/10.1177/15280837211003165.
(14) Ivanoska-Dacikj, A.; Makreski, P.; Sukumaran, S.; Stachewicz, U. Design of Experiments as a Comprehensive Framework to Optimize Electrospinning Parameters for Enhanced β-Phase in Poly(Vinylidene Fluoride-Co-Hexafluoropropylene). J. Polym. Res. 2025, 32 (9), 303. https://doi.org/10.1007/s10965-025-04515-9.
(15) Ivanoska-Dacikj, A.; Makreski, P.; Geskovski, N.; Karbowniczek, J.; Stachewicz, U.; Novkovski, N.; Tanasić, J.; Ristić, I.; Bogoeva-Gaceva, G. Electrospun PEO/rGO Scaffolds: The Influence of the Concentration of rGO on Overall Properties and Cytotoxicity. Int. J. Mol. Sci. 2022, 23 (2), 988. https://doi.org/10.3390/ijms23020988.
(16) Zheng, W.; Liu, Z.; Ding, R.; Dai, Y.; Li, X.; Ruan, X.; He, G. Constructing Continuous and Fast Transport Pathway by Highly Permeable Polymer Electrospun Fibers in Composite Membrane to Improve CO2 Capture. Sep. Purif. Technol. 2022, 285, 120332. https://doi.org/10.1016/j.seppur.2021.120332.
(17) Pereao, O. K.; Bode-Aluko, C.; Ndayambaje, G.; Fatoba, O.; Petrik, L. F. Electrospinning: Polymer Nanofibre Adsorbent Applications for Metal Ion Removal. J. Polym. Environ. 2017, 25 (4), 1175–1189. https://doi.org/10.1007/s10924-016-0896-y.
(18) Kumar, M.; Chowdhury, S.; Kaur Randhawa, J. Emerging Trends in Membrane-Based Wastewater Treatment: Electrospun Nanofibers and Reticular Porous Adsorbents as Key Components. Environ. Sci. Water Res. Technol. 2024, 10 (1), 29–84. https://doi.org/10.1039/D3EW00119A.
(19) Kumar, S.; Shandilya, M.; Uniyal, P.; Thakur, S.; Parihar, N. Efficacy of Polymeric Nanofibrous Membranes for Proficient Wastewater Treatment. Polym. Bull. 2023, 80 (7), 7145–7200. https://doi.org/10.1007/s00289-022-04417-6.
(20) Auras, R. A.; Lim, L.-T.; Selke, S. E. M.; Tsuji, H. Poly(Lactic Acid): Synthesis, Structures, Properties, Processing, Applications, and End of Life; John Wiley & Sons, 2022.
(21) Vidović, E.; Faraguna, F.; Jukić, A. Influence of Inorganic Fillers on PLA Crystallinity and Thermal Properties. J. Therm. Anal. Calorim. 2017, 127 (1), 371–380. https://doi.org/10.1007/s10973-016-5750-x.
(22) Zhao, S.; Li, Q.; Tang, Z.; Yang, Y.; Wu, J.; Gao, P.; Qian, Y.; Chen, J.; Xue, G. Simultaneous Removal of Cr, Cu, Zn, and Cd by Nano Zero-Valent Iron Modified Sludge Biochar in High Salinity Wastewater. Sep. Purif. Technol. 2024, 347, 127560. https://doi.org/10.1016/j.seppur.2024.127560.
(23) Boškovski, B.; Bogoevski, S.; Ruseska, G.; Atkovska, K. High Temperature Crystallization Process into Opalized Tuff. Geol. Maced. 2015, 29 (2), 209–213.
(24) Bogoevski, S.; Boškovski, B.; Ruseska, G.; Atkovska, K. Concentration of Carbonate Admixture from Opalized Tuff into One Separate Fraction; Geol. Maced. 2016, 30 (1), 89–95.
(25) AD Strmos Probistip – Macedonia. Opalized tuff — general, chemical, mineralogical, and physical properties. Strmos: Macedonia (archived Oct 18, 2009). https://web.archive.org/web/20091018163225/http://www.strmos.com.mk/DesktopDefault.aspx?tabindex=1&tabid=23 (accessed Sept 16, 2025).
(26) Pervin, R.; Ghosh, P.; Basavaraj, M. G. Tailoring Pore Distribution in Polymer Films via Evaporation Induced Phase Separation. RSC Adv. 2019, 9 (27), 15593–15605. https://doi.org/10.1039/C9RA01331H.
(27) Chan, K.-Y.; Li, C.-L.; Wang, D.-M.; Lai, J.-Y. Formation of Porous Structures and Crystalline Phases in Poly(Vinylidene Fluoride) Membranes Prepared with Nonsolvent-Induced Phase Separation—Roles of Solvent Polarity. Polymers 2023, 15 (5), 1314. https://doi.org/10.3390/polym15051314.
(28) Faustini, M.; Boissière, C.; Nicole, L.; Grosso, D. From Chemical Solutions to Inorganic Nanostructured Materials: A Journey into Evaporation-Driven Processes. Chem. Mater. 2014, 26 (1), 709–723. https://doi.org/10.1021/cm402132y.
(29) Huang, C.; Thomas, N. L. Fabrication of Porous Fibers via Electrospinning: Strategies and Applications. Polym. Rev. 2020, 60 (4), 595–647. https://doi.org/10.1080/15583724.2019.1688830.
(30) Huang, X.; Gao, J.; Zheng, N.; Li, W.; Xue, H.; Li, R. K. Y. Influence of Humidity and Polymer Additives on the Morphology of Hierarchically Porous Microspheres Prepared from Non-Solvent Assisted Electrospraying. Colloids Surf. Physicochem. Eng. Asp. 2017, 517, 17–24. https://doi.org/10.1016/j.colsurfa.2017.01.003.
(31) Natarajan, L.; New, J.; Dasari, A.; Yu, S.; Manan, M. A. Surface Morphology of Electrospun PLA Fibers: Mechanisms of Pore Formation. RSC Adv. 2014, 4 (83), 44082–44088. https://doi.org/10.1039/C4RA06215A.
(32) Jing, M.; Liu, X.; Ma, L.; Cao, F.; Wang, Z.; Wang, Y.; Liu, C.; Shen, C. Impact of the Topography of Fiber Surface on the Interfacial Crystallization Behavior of Poly(Lactide). Macromolecules 2023, 56 (18), 7454–7466. https://doi.org/10.1021/acs.macromol.3c00014.
(33) Rezabeigi, E.; Wood-Adams, P. M.; Demarquette, N. R. Complex Morphology Formation in Electrospinning of Binary and Ternary Poly(Lactic Acid) Solutions. Macromolecules 2018, 51 (11), 4094–4107. https://doi.org/10.1021/acs.macromol.8b00083.
(34) Eversull, L. G.; Ferrell, R. E. Disordered Silica with Tridymite-like Structure in the Twiggs Clay. Am. Mineral. 2008, 93 (4), 565–572. https://doi.org/10.2138/am.2008.2603.
(35) Elzea, J. M.; Rice, S. B. Tem and X-Ray Diffraction Evidence for Cristobalite and Tridymite Stacking Sequences in Opal. Clays Clay Miner. 1996, 44 (4), 492–500. https://doi.org/10.1346/CCMN.1996.0440407.
(36) Önal, M.; Kahraman, S.; Sarıkaya, Y. Differentiation of α-Cristobalite from Opals in Bentonites from Turkey. Appl. Clay Sci. 2007, 35 (1), 25–30. https://doi.org/10.1016/j.clay.2006.07.003.
(37) Beddiaf, S.; Chihi, S.; Leghrieb, Y. The Determination of Some Crystallographic Parameters of Quartz, in the Sand Dunes of Ouargla, Algeria. J. Afr. Earth Sci. 2015, 106, 129–133. https://doi.org/10.1016/j.jafrearsci.2015.03.014.
(38) Martel, C.; Pichavant, M.; Di Carlo, I.; Champallier, R.; Wille, G.; Castro, J. M.; Devineau, K.; Davydova, V. O.; Kushnir, A. R. L. Experimental Constraints on the Crystallization of Silica Phases in Silicic Magmas. J. Petrol. 2021, 62 (1), egab004. https://doi.org/10.1093/petrology/egab004.
(39) Graetsch, H. Structural Characteristics of Opaline and Microcrystalline Silica Minerals. Rev. Mineral. Geochem. 1994, 29 (1), 209–232.
(40) Oliveira, J. E.; Mattoso, L. H. C.; Orts, W. J.; Medeiros, E. S. Structural and Morphological Characterization of Micro and Nanofibers Produced by Electrospinning and Solution Blow Spinning: A Comparative Study. Adv. Mater. Sci. Eng. 2013, 2013 (1), 409572. https://doi.org/10.1155/2013/409572.
(41) Weng, Q.-H.; Hu, M.-H.; Wang, J.-F.; Hu, J.-J. Enhancing the Flexibility and Hydrophilicity of PLA via Polymer Blends: Electrospinning vs. Solvent Casting. Polymers 2025, 17 (6), 800. https://doi.org/10.3390/polym17060800.
(42) Zhou, H.; Green, T. B.; Joo, Y. L. The Thermal Effects on Electrospinning of Polylactic Acid Melts. Polymer 2006, 47 (21), 7497–7505. https://doi.org/10.1016/j.polymer.2006.08.042.
(43) Vadas, D.; Nagy, Z. K.; Csontos, I.; Marosi, G.; Bocz, K. Effects of Thermal Annealing and Solvent-Induced Crystallization on the Structure and Properties of Poly(Lactic Acid) Microfibres Produced by High-Speed Electrospinning. J. Therm. Anal. Calorim. 2020, 142 (2), 581–594. https://doi.org/10.1007/s10973-019-09191-8.
(44) Yan, J.; Zheng, Y.; Zhou, Y.; Liu, Y.; Tan, H.; Fu, Q.; Ding, M. Application of Infrared Spectroscopy in the Multiscale Structure Characterization of Poly(l-Lactic Acid). Polymer 2023, 278, 125985. https://doi.org/10.1016/j.polymer.2023.125985.
(45) Siriprom, W.; Sangwaranatee, N.; Herman; Chantarasunthon, K.; Teanchai, K.; Chamchoi, N. Characterization and Analyzation of the Poly (L-Lactic Acid) (PLA) Films. Mater. Today Proc. 2018, 5 (7, Part 1), 14803–14806. https://doi.org/10.1016/j.matpr.2018.04.009.
(46) Makreski, P.; Pejov, L.; Jovanovski, G. Crossroads of Vibrational (Infrared and Raman) Spectroscopy and X-Ray Powder Diffraction in Identification and Characterization of Some Minerals – Advantages and Limitations. A Review. Maced. J. Chem. Chem. Eng. 2024, 43 (1), 1–28. https://doi.org/10.20450/mjcce.2024.2858.
(47) Karatas, M. Removal of Pb(II) from Water by Natural Zeolitic Tuff: Kinetics and Thermodynamics. J. Hazard. Mater. 2012, 199–200, 383–389. https://doi.org/10.1016/j.jhazmat.2011.11.035.
(48) Varshney, D.; Kumar, A. Structural and Optical Properties of Ni Substituted CaCu3Ti4 − xNixO12. Optik 2015, 126 (22), 3437–3441. https://doi.org/10.1016/j.ijleo.2015.06.069.
(49) Dai, Y.; Niu, L.; Zou, J.; Chen, T.; Liu, H.; Zhou, Y. Preparation of Core-Shell Magnetic Fe3O4@SiO2-Dithiocarbamate Nanoparticle and Its Application for the Ni2+, Cu2+ Removal. Chin. Chem. Lett. 2018, 29 (6), 887–891. https://doi.org/10.1016/j.cclet.2017.11.029.
(50) Ye, R.-P.; Gong, W.; Sun, Z.; Sheng, Q.; Shi, X.; Wang, T.; Yao, Y.; Razink, J. J.; Lin, L.; Zhou, Z.; Adidharma, H.; Tang, J.; Fan, M.; Yao, Y.-G. Enhanced Stability of Ni/SiO2 Catalyst for CO2 Methanation: Derived from Nickel Phyllosilicate with Strong Metal-Support Interactions. Energy 2019, 188, 116059. https://doi.org/10.1016/j.energy.2019.116059.
(51) Lee, J.-Y.; Chen, C.-H.; Cheng, S.; Li, H.-Y. Adsorption of Pb(II) and Cu(II) Metal Ions on Functionalized Large-Pore Mesoporous Silica. Int. J. Environ. Sci. Technol. 2016, 13 (1), 65–76. https://doi.org/10.1007/s13762-015-0841-y.
(52) Ali, A.; Alharthi, S.; Ahmad, B.; Naz, A.; Khan, I.; Mabood, F. Efficient Removal of Pb(II) from Aqueous Medium Using Chemically Modified Silica Monolith. Molecules 2021, 26 (22), 6885. https://doi.org/10.3390/molecules26226885.
(53) Stein, M.; Buchweitz, M.; Mayer, P.; Rennert, T. Does Adsorption of Cd, Cu and Pb on Polymeric Silicic Acid Occur Under Acidic Conditions? Silicon 2023, 15 (16), 7205–7212. https://doi.org/10.1007/s12633-023-02576-3.
(54) Ren, J.; Zheng, L.; Su, Y.; Meng, P.; Zhou, Q.; Zeng, H.; Zhang, T.; Yu, H. Competitive Adsorption of Cd(II), Pb(II) and Cu(II) Ions from Acid Mine Drainage with Zero-Valent Iron/Phosphoric Titanium Dioxide: XPS Qualitative Analyses and DFT Quantitative Calculations. Chem. Eng. J. 2022, 445, 136778. https://doi.org/10.1016/j.cej.2022.136778.
(55) Du, J.; Fan, L.; Wang, Q.; Min, F. Adsorption of Cr(OH)n(3−n)+ (n = 1–3) on Illite (001) and (010) Surfaces: A DFT Study. Processes 2021, 9 (11), 2048. https://doi.org/10.3390/pr9112048.
(56) Bao, J.; Feng, Y.; Pan, Y.; Jiang, J. Adsorption of Co2+ and Cr3+ in Industrial Wastewater by Magnesium Silicate Nanomaterials. Materials 2024, 17 (9), 1946. https://doi.org/10.3390/ma17091946.
(57) Fijoł, N.; Abdelhamid, H. N.; Pillai, B.; Hall, S. A.; Thomas, N.; Mathew, A. P. 3D-Printed Monolithic Biofilters Based on a Polylactic Acid (PLA) – Hydroxyapatite (HAp) Composite for Heavy Metal Removal from an Aqueous Medium. RSC Adv. 2021, 11 (51), 32408–32418. https://doi.org/10.1039/D1RA05202K.
(58) Chen, J.; Duan, Q.; Liu, J.; Zhang, S.; Zhang, J.; Lin, S. Adsorption of Fe-Modified Peanut Shell Biochar for Pb(II) in Mixed Pb(II), Cu(II), Ni(II) Solutions. Sci. Rep. 2025, 15 (1), 13558. https://doi.org/10.1038/s41598-025-97042-y.
(59) Prazeres Mazur, L.; Reis Ferreira, R.; Felix da Silva Barbosa, R.; Henrique Santos, P.; Barcelos da Costa, T.; Gurgel Adeodato Vieira, M.; da Silva, A.; dos Santos Rosa, D.; Helena Innocentini Mei, L. Development of Novel Biopolymer Membranes by Electrospinning as Potential Adsorbents for Toxic Metal Ions Removal from Aqueous Solution. J. Mol. Liq. 2024, 395, 123782. https://doi.org/10.1016/j.molliq.2023.123782.
Downloads
Published
Versions
- 2025-12-24 (3)
- 2025-12-24 (2)
- 2025-12-22 (1)
How to Cite
Issue
Section
License
Copyright (c) 2025 Aleksandra Ivanoska-Dacikj, Gordana Bogoeva-Gaceva, Petre Makreski, Maja Ristova Delipetrev, Blažo Boev, Gligor Jovanovski
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
